Application Profile

Terminal Pin for Glass to Metal Seal

Multi die cold formed  52 alloy per ASTM f-30 glass to metal seal terminal pin
Terminal Pin for Glass to Metal Seal 3D Rendering Terminal Pin for Glass to Metal Seal Technical Drawing
Use:  Terminal component in high volume glass to metal seal (hermetic) electronic device.
Material:  52 alloy per ASTM f-30 (nickel/iron alloy-glass to metal seal quality).
Manufacturing Method: 
  • Multi Die cold formed.
  • Secondary performed for creation of sealing flats.

 

_____________________________________________________________________


For best ROI in the design stage of your project.

Click Here to Contact a Sussex Engineer.

_____________________________________________________________________

Notable Features: 
  • Very large volume head combined with small diameter shaft.
  • Very high surface finish. No machining lines or machining tit present at either end of the part.
  • Two sealing flats present on shaft.
  • Very good surface finish present on the sealing surfaces. No leak paths.
Advantages: 
  • Material waste is minimal.
  • Sealing flats do not compromise the shaft diameter (ie: NO bulge present on the diameter).
  • Concentricity of all diameters is near perfect: TIR approx. .002".
  • Burrless - especially around the seal flat area.
INFORMATION
 

Sign up for informative quarterly emails on cold forming.



First Name
Last Name
Email
Company
Comments

 




Thank You!


Thank you for signing up for our newsletter.

Sussex Wire values your privacy. If you receive unwanted email, you may opt out to future alerts at any time.


Sussex Wire