Application Profile

Valve Core Pin for Air Valve

Multi die cold formed CDA 260 unleaded brass valve/core pin for air valve
Valve/Core Pin for Air Valve 3D Rendering Valve/Core Pin for Air Valve Technical Drawing
Use:  Tire valve pin.
Material:  CDA 260 brass (unleaded brass).
Manufacturing Method: 
  • Multi Die cold formed.



Need a Custom Part?
Click Here to Contact a Sussex Engineer.



Notable Features: 
  • Three diameter headed pin.
  • High surface finish no machining lines or machining tit present at either end of the part.
  • Material waste is minimal.
  • The part is formed from No-Lead Brass round wire.
  • Normally machined parts are turned from Leaded brass material (ie: CDA360). Lead is being discouraged from use world wide and the CDA 260 (unleaded brass) is a type of brass that is easily cold formed and will substitute easily.
  • Production speeds are high allowing for low production costs. Much faster than machining.
  • Concentricity of all diameters is near perfect: TIR approx. .002".

Sign up for informative quarterly emails on cold forming.

First Name
Last Name


Thank You!

Thank you for signing up for our newsletter.

Sussex Wire values your privacy. If you receive unwanted email, you may opt out to future alerts at any time.

Sussex Wire