Application Profile

Auto-Rectifier Terminal Pin with Coined C-Bend

Cold Headed Auto Rectifier: Coined C-Bend
Auto Rectifier: Coined C-Bend 3D Rendering Auto Rectifier: Coined C-Bend Technical Drawing
Use:  Terminal pin providing coined & trimmed flat platform for die braze attachment.
Material:  CDA 102 copper (oxygen free; high conductivity copper).
Manufacturing Method: 
  • Coined & trimmed C-Bend: on a slide machine.
  • Complete off machine.



For best ROI in the design stage of your project.

Click Here to Contact a Sussex Engineer.



Notable Features: 
  • Coined area that is formed into a precise C-Bend.
  • Large coined area for braze attach platform.
  • Smooth top head surface (rms 32 and better); with zero voids or inclusions or folds on the braze surface.
  • Flat section below the coined C-Bend.
  • Material waste is minimal. The part is formed from copper round wire.
  • The C-Bend section provides a braze platform for die attachment and the C-Curve provides give to provide stress relief.
  • Production speeds are high for this high volume piece allowing for low production costs.
  • The flat area below the coined C-Bend is needed for anti-rotational stability when encased in plastic.
  • The current capacity is high due to the .100\" (2.5mm) diameter wire.
  • This piece is manufactured from.

Sign up for informative quarterly emails on cold forming.

First Name
Last Name


Thank You!

Thank you for signing up for our newsletter.

Sussex Wire values your privacy. If you receive unwanted email, you may opt out to future alerts at any time.

Sussex Wire