Application Profile

Counterbored Tube Cold Formed Connector Component

Multi die cold formed CDA 102 copper counterbored tube cold formed connector part
Counterbored Tube Cold Formed Connector Component 3D Rendering Counterbored Tube Cold Formed Connector Component Technical Drawing
Use:  Component in high volume glass to metal seal (hermetic) electronic.
Material:  CDA 102 Copper
Manufacturing Method: 
  • Multi Die cold formed.



For best ROI in the design stage of your project.

Click Here to Contact a Sussex Engineer.



Notable Features: 
  • Very smooth surface finish on OD and ID.
  • Very good surface finish present on the sealing surfaces.
  • Sharp corners with no burrs.
  • Wall thickness changes from .010" (.25mm) thick to .025" (.64mm) thick.
  • Material waste is minimal.
  • Cold forming the tube eliminates the presence of spiral machining lines or draw lines in drawn tubing.
  • Production speeds are high allowing for low production costs. Much faster than machining.
  • Tube component is manufactured from wire, not drawn tubing allowing for better availability and less expensive raw material cost.

Sign up for informative quarterly emails on cold forming.

First Name
Last Name


Thank You!

Thank you for signing up for our newsletter.

Sussex Wire values your privacy. If you receive unwanted email, you may opt out to future alerts at any time.

Sussex Wire